Elastic surface seal for medium to high-strength connections. Due to its highly viscous form ideal for vertical surfaces and overhead work.
One-component, medium strength anaerobic sealant which cures of air between close fitting metal surfaces. Typical applications include sealing close fitting joints between rigid metal faces and flanges. Immediately after the flange mounting tightness is given to low pressures. Typical application is the production of liquid gaskets on rigid flanged connections, eg gearbox and engine casings, etc. The thixotropic nature of LOCTITE® 518 reduces the migration of liquid product after application to the substrate.
A face seal is a sealant between two mounted flanges with screws. Gaskets prevent the escape of gaseous and liquid media, by completely fill the space between the flange surfaces. These seals must therefore remain intact and tight throughout the life of the connection. The face seal must be resistant to the medium to be sealed and the operating temperatures, pressures and relative movements or deformations of the parts can withstand.
Ideal for use on rigid iron, steel and aluminum flanges
Color: red (fluorescent)
Strength: Medium to high strength
Temperature range: -55 ° C to + 155 ° C
Max. Gap: 0.25 mm
Handling strength (steel / aluminum): 25/10 minutes
Cure mechanism: Anaerobic
Chemical Type: Methacrylate
Cure Speed: Fast
. Tolerance f micromotions: Medium
Increasing the torsional rigidity: Medium
Release: P1 NSF Reg No .: 123,758th
Content: 25 ml