adhesive lined, insulated and sealed.
Line - min .: 2.0 mm² area
Line - range max. 4,0 mm²
Insulation Colour: Red
Ø Bundle max .: 4,5
Length: 37.7 mm
Package = minimum order quantity
Example of use:
15 mm of the insulation of all lines to be connected to each other are removed.
Then align the lines and form a trunk group.
Insert the wire bundle in the Interconnect-grip end users and turn slightly.
The copper insert clamped firmly on the stripped wires and keeps them together.
Then heat the end connector with a hot air blower. Area of the copper insert to heat the solder ring, the solder melts and flows into the core of the cable bundle. When using a sealed Endspleißes series GRS the sealing ring from wärmeschmelzendem adhesive to be heated until the adhesive melts and flows between the pipes.