Size range M6 / M8 / M10.
1 each twist drill 6.3 / 8.4 and 10.5
1 each hand threaded Derb Ohrer 0140.0 Type M6, M8 and M10
10 each thread inserts M6x6, M6x9, M6x12, M8x8, M8x12, M8x16, M10x10, M10x15, M10x20
1 each mounting screw type 4150 for M6, M8 and M10
per 1 tang break for M6, M8 and M10
HELICOIL ® plus thread inserts are made of austenitic chromium-nickel steel (tensile strength of at least 1400 N/mm2). The rolled screw thread has a high surface quality. This ensures a high-strength, wear-resistant thread with an extremely low and constant thread friction. With repeated screwing a higher and constant biasing force is thus obtained for the same torque. This also leads to a better utilization of the yield strength of high-strength bolts. Significantly reduces the torsional stress is: compared to cut threads, the surface roughness is lower HELICOIL ® plus up to 90 percent.